Rechercher
    Trailer
    corrosion_experts

    Trailer

    Whether it is flatbed vehicles, box trucks or tipper trucks: a wide range of components are used in and on truck trailers. With the long-term use on roads and highways, the components are subjected to a range of different stresses, such as stone impact, dirt, frost and continuous cleaning cycles. The long-term ensuring of component functionality and operational readiness of the trailer is therefore essential.

    Exemplary components

    Screwed fastenersAxle supportChassis

    Screwed fasteners are found in truck trailers in various different models and geometries. They are not only required to withstand high temperatures and mechanical stresses, but also maintain defined fastening parameters against various surfaces.

    An axle support is a composite of different components. Together, they secure the vehicle to the chassis and therefore play a key role, not only with regard to safety aspects.

    The supporting structural components of the trailer such as side beams or cross struts require long-term corrosion protection. In addition to the technical requirements the coating system must also contribute to preserving the functionality of the chassis.

     

    Requirements

    • Corrosion protection (720 h as per DIN EN ISO 9227)
    • Colouring (silver or black)
    • Coefficients of friction
    • Chemical resistance
    • Stone impact resistance

    Solutions

    In addition to the standard solutions of hot galvanisation and KTL + powder, special zinc flake systems comprising a base coat and organic or inorganic topcoat are also suitable for the efficient coating of trailer components. Even with comparatively thin coats, these offer cathodic corrosion protection whilst at the same time ensuring a consistent appearance of the trailer. As the zinc flake coating is applied at low annealing temperatures, there is no risk of deformation or loss of rigidity of the components through excessively high temperatures. The recutting or reworking of bores and threads is also not necessary due to the extremely thin and efficient layer structure, which significantly facilitates fastening and assembly.

     

    You might also be interested in

    smallRetina 12:49:55 mediumAlias 12:49:55 large 12:49:55 xlarge 12:49:55
    Chassis eines Trucks

    Chassis

    The truck chassis plays a key role here: it consists of numerous components that form a complex whole that is responsible for aspects such as driving dynamism and safety. Technically sophisticated and safety-relevant systems are therefore essential.
    smallRetina 12:49:55 mediumAlias 12:49:55 large 12:49:55 xlarge 12:49:55
    Interieur eines Trucks

    Interior

    Components in the interior of vehicles are not exposed to corrosive stresses to such an extent. It is important in this area to ensure the functionality of parts that in use on a daily basis.
    smallRetina 12:49:55 mediumAlias 12:49:55 large 12:49:55 xlarge 12:49:55
    Motorrad eines Trucks

    Engine compartmen

    A wide range of parts are used in the engine compartments of trucks. This often results in the combination of different, sometimes high-tensile materials, such as aluminium, stainless steel, plastics and steel. The components fitted therefore need to withstand particularly high temperatures and satisfy a range of corrosion protection requirements