Rechercher
    corrosion_experts

    Road

    From traffic signs and anchorings to noise protection walls and retaining systems for slopes (geotechnical engineering): steel safety-relevant equipment is used everywhere on roads and motorways. As these components require long-term protection against weathering, DIN EN ISO 12944-2 stipulates high-quality coating with the highest corrosion protection class.

    Exemplary components

    Fastening elementsBar anchors

    To rule out corrosion damage from the beginning, screw connections and fasteners for traffic signs – i.e. screws, nuts and all steel fasteners – are increasingly coated with long-lasting protection.

    Bar anchors are used to secure rocks and slopes, as well as for back anchoring. When used in road construction, the coating should offer low work input and easy assembly.

     

    Requirements

    • Up to CX as per DIN EN ISO 12944
    • Corrosion protection 1,440 h (in SST as per DIN EN ISO 9227)
    • Sliding properties
    • UV resistance

    Solutions

    One practical solution is zinc flake coating, which achieves a protective effect of up to 1,000 hours against base metal corrosion (red rust) as per DIN EN ISO 9227 at a low coat thickness (8–20 µm). In addition, screw connections or fasteners coated with the zinc flake technology are especially smooth and easy to assemble thanks to the low coat thickness. This is particularly important for systems used in road construction. Moreover, the highly environmentally-friendly and resource-saving system developed by DÖRKEN can also be used in the coating of steel components with large surface areas.

    You might also be interested in

    smallRetina 03:32:06 mediumAlias 03:32:06 large 03:32:06 xlarge 03:32:06

    Bridges

    Today, steel and reinforced concrete bridges have to withstand extreme loads: they are exposed to constantly changing weather conditions and bear enormous loads. In order to reach the targeted duration of use of 40 years and satisfy the corrosion protection requirements defined in DIN EN ISO 12944 the steel components utilised must be provided with effective protection.
    smallRetina 03:32:06 mediumAlias 03:32:06 large 03:32:06 xlarge 03:32:06

    Engineering

    Metal components are used in a wide range of applications for stabilising, securing or reinforcing. Corrosion protection plays an important role wherever these metal constructions come into contact with moisture or are exposed to the weather.