Façade membrane for open joints DELTA^®-FASSADE COLOR PLUS

Coloured façade sheets with a large range of colours in seven standard colours for open façades equipped with joints reaching a width up to 50 mm and a maximum of joint proportion of 50% of the surface.

Sets additional accents in terms of design, behind open or transparent façade materials such as wood, expanded metal, metal mesh or glass.

Other special colours are available upon request.

01 /09

DELTA®-FASSADE COLOR PLUS rot in der Anwendung hinter Lochblech

DELTA®-FASSADE COLOR PLUS weiß in der Anwendung

DELTA®-FASSADE COLOR PLUS orange in der Anwendung

DELTA®-FASSADE COLOR PLUS orange Referenzobjekt

DELTA®-FASSADE COLOR PLUS orange hinter Lochblech

DELTA®-FASSADE COLOR PLUS orange hinter Streckmetall

DELTA®-FASSADE COLOR PLUS grün hinter einer Holzfassade

Advantages

Permanently UV-resistant
The excessive UV-exposure may result in material fatigue or embrittlement of the material and impair the protective function of the façade membranes. Thanks to a special coating of DELTA^®-FASSADE COLOR PLUS, the membrane and the colour pigments retain their properties so that you can benefit from a permanent UV-resistance.
Flame retardant
The product DELTA^®-FASSADE COLOR PLUS meets the requirements of the Euro fire class B-s1, d0. This is the highest class of flame-retardant membranes and means that in the event of a fire, it does not drip off and only causes a low level of smoke. This way you can guarantee the protection of houses and residents.
Great range of designs
Through the selection of different materials, material combinations and (visible or concealed) fastening techniques, the rear-ventilated curtain walls (VHF) offer a great range of designs. Thanks to its seven different colour tones, the product DELTA^®-FASSADE COLOR PLUS offers you the option of designing a façade with a completely unique aesthetic. In this way, the object can be given an individual look.
Vapour permeability
The SD value of the membrane of only approximately 0.02 m guarantees the vapour permeability from the inside to the outside. This guarantees the functional reliability of the structure as well as a dry thermal insulation.

Application

DELTA^®-FASSADE COLOR PLUS can be installed behind wooden façades, wood composite, expanded metal, panels made of perforated sheet metal or transparent/glass façades equipped with joints reaching a width up to 50 mm and a maximum of joint proportion of 50% of the surface.

Configuration of the facade
Use our configurator as a source of inspiration. Combine your façade cladding with your desired colour and let your imagination have free rein: www.fassade-color.com

Reference

DELTA^®

Vocational school Längenfeldgasse
Vienna, A

On the facade of this extension building in Vienna, DELTA^®-FASSADE COLOR PLUS creates a three-dimensional depth effect and playfully breaks through the cool perforated sheet aesthetics. The technical properties of the blue façade membrane are particularly impressive.

DELTA^®

Bürogebäude
Hamm, DE

When it comes to the design of the facade of this engineering office in Hamm, the DELTA^®-FASSADE COLOR PLUS facade membrane provided a facade with a depth effect. The bright coral-red colour impressively enhances the three-dimensional effect of the facade.

Technical data

Material	Highly tear-resistant polyester fleece with a waterproof plastic coating and with adhesive zones placed on both edges.
Colour	Amber-orange, Coral red, Emerald green, Topaz blue, Pearl gray, Agate white, Onyx black.
Description	Coloured, vapour-permeable facade membrane for cladding equipped with joints reaching a maximum width of 50 mm and a maximum of joint proportion of 50% of the surface. In the case of glass cladding, the maximum penetration of UV-radiation may be 10%.
Surface weight	approx. 300 g/m²
Thickness	approx. 0,60 mm
Watertightness	Watertight W 1, EN 13859-1+2
Tensile strength	370 / 270 N/5 cm
Sd-value	approx. 0,02 m
Servicetemperature range	from -40 °C to +120 °C
Nail tear resistance	150 / 150 N
Fire index	Euroclass B-s1,d0; VKF RF2(5.2)
Moisture resistance factor	approx. 0,028 m²hPa/mg
Roll weight	approx. 13,5 kg
Roll size	30 m x 1.50 m