Air and vapour barrier DELTA^®-REFLEX

Air and vapour barrier made of very tear-resistant, stable four-layer material suitable for roofs and facades.

Saving energy and money! Benefit both from the heat reflection and the more elevated thermal protection.

01 /06

DELTA®-REFLEX beim Einsatz in Industrieleichtdächern

Advantages

Exceptional processing properties and long-term protection of thermal insulation and roof structure
DELTA^®-REFLEX has an Sd value of approx. 150 m and, thanks to its lattice reinforcement, a high tear strength of up to 450/400 N/5 cm. Thanks to the high tensile strength and “boardiness” of the track, it is easy to use and perfectly suitable for the construction site.
Heat reflection
The product DELTA^®-REFLEX provides a optimised heat protection by means of heat reflection (tested by the Institute Fraunhofer Institut in Freiburg, Germany). Saving energy and money!
Air and vapour
Stop connection with the system accessories DELTA^®-MULTI BAND, DELTA^®-TIXX, DELTA^®-LIQUIXX, DELTA^®-KOM-BAND, DELTA^®-REFLEX also offers a safe air and vapour stop for all overlapping elements and connections. As a consequence, no heat energy gets lost through uncontrolled air flow.
Structural fire protection for flat roofs
The product DELTA^®-REFLEX offers certified security for large flat roofs in industrial buildings. The requirements of the standard DIN 18234-1 are met. The track width of 3 m is also ideal for use in lightweight industrial roofs - whether on aerated concrete or trapezoidal sheet metal substructures.

Application

Thanks to its layer structure and its material composition the product DELTA^®-REFLEX is tear-resistant and therefore easy to use.
The above-average tear strength (of approx. 450/400 N/5 cm) prevents tearing and further tearing in the course of the installation. The stable material enables rapid and clean work, even on difficult details.

Technical data

Material	Corrosion-protected, embedded aluminium layer between highly transparent polyester film and mesh-reinforced polyethylene film.
Suitability	Air and vapour barrier with high safety reserves in the roof, wall, and ceiling.
Reaction to fire	Class E, EN 13501-1
Tensile strength	approx. 450/400 N/5 cm, EN 12311-2
Sd-value	approx. 150 m
Servicetemperature range	from -40 °C to +80 °C
Weight	approx. 180 g/m²
Roll weight	approx. 13,5 kg
Roll size	50 m x 1,5 m, 25 m x 3 m

Accessories

DELTA^®-MULTI-BAND

Universal, highly aging-resistant adhesive tape with maximum adhesive strength both for indoor and outdoor areas on roofs.

DELTA^®-INSIDE-BAND

Single-sided paper backing tape for indoor use. Tearable by hand.

DELTA^®-FLEXX BAND F100

Connection and sealing tape with high adhesive strength and high flexibility at the same time - for details both outside and inside.

Abdichten einer Kabeldurchführung mit DELTA®-FLEXX BAND FG 80 / FG 150

DELTA^®-FLEXX-BAND FG 80/150

Adhesive tape for sealing the most difficult, three-dimensional details inside and outside, such as for example corners, edges, and openings.

DELTA^®-LIQUIXX

Pasty functional coating for the airtight connection of difficult details when laying DELTA^® air and vapour barriers and/or brakes.

DELTA^®-TIXX

Permanently reliable cartridge adhesive for the airtight connection of air and vapour barriers and/or brakes.

DELTA^®-TIXX VDR

Adhesive cord for airtight connection of DELTA^® air and vapour barriers to smooth components (such for example plastered substrates and wood-based panels).