Roofing membrane DELTA^®-ALPINA

Robust and diffusionopen roofing membrane for slightly inclined flat roofs. Can be welded with hot air or solvent welding agent.

Now new: With a higher grammage for more safety when welding!

The membrane complies with the new ZVDH product data sheet UDB-eA and, in combination with the DELTA^® system components, enables the execution of a "seam-joined underlay with integrated counter batten" (class 1) and a "seam-joined underlay with nail sealing tape under the counter batten" (class 2) in accordance with the regulations.

01 /05

DELTA®-ALPINA in der Anwendung auf einem flach geneigtem Dach

Advantages

With 30-year warranty
We guarantee that DELTA^®-ALPINA, expertly installed, will retain its function (resistance against water penetration: Class W1) for 30 years. If a problem arises regarding this during this time, we will not only replace the material, but also bear the cost of removal and installation. The procedure is simple: One call and we take care of it. Click here for the statement of warranty.
Enables Class 1 and Class 2 roofs to be constructed in compliance with regulations
In combination with the DELTA^® system components (DELTA^®-ALPINA BAND, DELTA^®-ALPINA QSM, DELTA^®-TILAXX ULTRA, DELTA^®-FLEXX BAND), DELTA^®-ALPINA enables the construction of a "seam-joined underlay with integrated counter batten" (class 1) and a "seam-joined underlay with nail sealing tape under the counter batten" (class 2) in accordance with the ZVDH technical regulations.
Maximum laying safety
The surface of the roofing membrane is extremely slip and tear-proof, offering maximum safety during application.
Minimal offcuts
The symmetrical structure means that DELTA^®-ALPINA can be applied irrespective of side. This results in minimal offcuts. This saves material and costs.
Processing also possible at low temperatures
DELTA^®-ALPINA guarantees assured processing - even at low temperatures. This helps avoid weather-related downtime.
Strict standards fulfilled
DELTA^®-ALPINA meets the strict standards of the alpine nations Switzerland and Austria.
Austria: Underlayment (DU Type II) according to ÖNORM B 3661:2017 and according to ÖNORM B 4119 for sub-roofs with enhanced rain resistance
Switzerland: Underlayment for enhanced and extreme stresses according to SIA 232/1:2011
Equipped with DELTA^®-AMS and DELTA^®-BiCo technologies.

Application

DELTA^®-ALPINA can be laid quickly and safely. Trapezoid counter battens are not required.
The product is laid onto a casing or comparable pressure resistant surface. The roll must be aligned without creasing. The roll is secured in the area of the upper and side overlaps using concealed staples or clout nails.
Welding can be undertaken homogeneously with both DELTA^®-ALPINA QSM (welding seam width min. 4 cm) and hot air (welding seam width min. 2 cm. ÖNORM B 4119 min. 4 cm).

Technical data

Material	Highly tear-resistant PES non-woven fabric with breathable PU coating top and bottom.
Suitability	In the case of fully insulated and ventilated roofs, on casing or a comparable pressure resistant surface.
	Germany: ZVDH product data sheet for diffusion-open underlays for extended applications (UDB-eA)
	Austria: Underlayment (UD Type II) according to ÖNORM B 3661:2017 and according to ÖNORM B 4119 for sub-roofs with enhanced rain resistance
	Switzerland: Underlayment for enhanced and extreme stresses according to SIA 232/1:2011
Reaction to fire	Class E, EN 13501-1
Fire index	4.2, VKF
Tensile strength	approx. 450/410 N/5 cm, EN 12311-1+2
Shearing resistance of joints	approx. 400 N, EN 12317-2
Watertightness	Watertight W 1, EN 13859-1+2
Sd-value	approx. 0.30 m, EN 1931
Servicetemperature range	from -40 °C to +80 °C
Short-term maximum temperature load of the material	+120 °C
Weight	approx. 370 g/m²
Roll weight	approx. 16,7 kg
Roll size	30 m x 1,50 m

Accessories

DELTA^®-ALPINA QSM

Patented solvent welding agent for homogeneous welding of DELTA^®-ALPINA coverings.

DELTA^®-ALPINA BAND

Strips for the covering and sealing of counter battens or details when laying DELTA^®-ALPINA as a watertight sub-roof (as per ZVDH Class 1).

DELTA^®-FLEXX MANSCHETTE

Highly elastic pipe collar, universal for standard pipe diameters 100 - 125 - 150 mm.

DELTA^®-FLEXX CORNER

Flexible corner sealing for all outer corners of chimneys and rising structures. For welding with hot air to DELTA^®- ALPINA.

DELTA^®-SCHAUM-BAND

One-sided adhesive nail sealing tape from the roll for the secure sealing of nail spots.

DELTA^®-PINSELFLASCHE

Bottle for expert application of DELTA^®-ALPINA QSM.

DELTA^®-TILAXX ULTRA

Universally applicable, high-performance, permanently elastic sealing and bonding adhesive for all DELTA^® membranes in exterior and interior applications from cellar to roof