Façade membrane for open joints DELTA®-FASSADE COLOR PLUS

Coloured façade sheets with a large range of colours in seven standard colours for open façades equipped with joints reaching a width up to 50 mm and a maximum of joint proportion of 50% of the surface.

Sets additional accents in terms of design, behind open or transparent façade materials such as wood, expanded metal, metal mesh or glass.

Other special colours are available upon request.

    smallRetina 06:58:43
    DELTA®-FASSADE COLOR PLUS rot in der Anwendung hinter Lochblech
    smallRetina 06:58:43
    DELTA®-FASSADE COLOR PLUS rot in der Anwendung hinter Lochblech
    smallRetina 06:58:43
    DELTA®-FASSADE COLOR PLUS weiß in der Anwendung
    smallRetina 06:58:43
    smallRetina 06:58:43
    DELTA®-FASSADE COLOR PLUS orange in der Anwendung
    smallRetina 06:58:43
    DELTA®-FASSADE COLOR PLUS orange Referenzobjekt
    smallRetina 06:58:43
    DELTA®-FASSADE COLOR PLUS orange hinter Lochblech
    smallRetina 06:58:43
    DELTA®-FASSADE COLOR PLUS orange hinter Streckmetall
    smallRetina 06:58:43
    DELTA®-FASSADE COLOR PLUS grün hinter einer Holzfassade

Advantages

  • Permanently UV-resistant
    The excessive UV-exposure may result in material fatigue or embrittlement of the material and impair the protective function of the façade membranes. Thanks to a special coating of DELTA®-FASSADE COLOR PLUS, the membrane and the colour pigments retain their properties so that you can benefit from a permanent UV-resistance.
  • Flame retardant
    The product DELTA®-FASSADE COLOR PLUS meets the requirements of the Euro fire class B-s1, d0. This is the highest class of flame-retardant membranes and means that in the event of a fire, it does not drip off and only causes a low level of smoke. This way you can guarantee the protection of houses and residents.
  • Great range of designs
    Through the selection of different materials, material combinations and (visible or concealed) fastening techniques, the rear-ventilated curtain walls (VHF) offer a great range of designs. Thanks to its seven different colour tones, the product DELTA®-FASSADE COLOR PLUS offers you the option of designing a façade with a completely unique aesthetic. In this way, the object can be given an individual look.
  • Vapour permeability
    The SD value of the membrane of only approximately 0.02 m guarantees the vapour permeability from the inside to the outside. This guarantees the functional reliability of the structure as well as a dry thermal insulation.

Application

DELTA®-FASSADE COLOR PLUS can be installed behind wooden façades, wood composite, expanded metal, panels made of perforated sheet metal or transparent/glass façades equipped with joints reaching a width up to 50 mm and a maximum of joint proportion of 50% of the surface.

Configuration of the facade
Use our configurator as a source of inspiration. Combine your façade cladding with your desired colour and let your imagination have free rein: www.fassade-color.com

Reference

Technical data

Material Highly tear-resistant polyester fleece with a waterproof plastic coating and with adhesive zones placed on both edges.
Colour Amber-orange, Coral red, Emerald green, Topaz blue, Pearl gray, Agate white, Onyx black.
Description Coloured, vapour-permeable facade membrane for cladding equipped with joints reaching a maximum width of 50 mm and a maximum of joint proportion of 50% of the surface. In the case of glass cladding, the maximum penetration of UV-radiation may be 10%.
Surface weight approx. 300 g/m²
Thickness approx. 0,60 mm
Watertightness Watertight W 1, EN 13859-1+2
Tensile strength 370 / 270 N/5 cm
Sd-value approx. 0,02 m
Servicetemperature range from -40 °C to +120 °C
Nail tear resistance 150 / 150 N
Fire index Euroclass B-s1,d0; VKF RF2(5.2)
Moisture resistance factor approx. 0,028 m²hPa/mg
Roll weight approx. 13,5 kg
Roll size 30 m x 1.50 m

Accessories

Download

Contact

smallRetina 06:58:44 mediumAlias 06:58:44 large 06:58:44 xlarge 06:58:44

Would you like information on detailed product properties, use cases or other technical topics?
Then feel free to contact our application department on +49 2330 63 578 or atabvf@doerken.de.

Do you have questions about prices, availability or the status of your order?
Our sales service will help you with these matters on +49 2330 63 636 or membranes@doerken.de.