Search

    Drainage membrane DELTA®-EQ DRAIN

    Particularly economical and efficient foundation wall protection and drainage membrane with high compressive strength and excellent drainage performance.

    Made as a protective and drainage layer for all cellar walls with pressure-resistant seals and for use on perimeter insulation.

    Meeting the requirements of DIN 4095, DIN 18533 and CE-certified according to EN 13252.

    01 /02
    smallRetina 10:09:11 mediumAlias 10:09:11 large 10:09:11 xlarge 10:09:11
    DELTA®-EQ DRAIN in der Anwendung
    smallRetina 10:09:11 mediumAlias 10:09:11 large 10:09:11 xlarge 10:09:11
    DELTA®-EQ DRAIN Illustration
    DELTA®-EQ DRAIN in use on the perimeter insulation panels.
      smallRetina 10:09:11
      DELTA®-EQ DRAIN in der Anwendung
      smallRetina 10:09:11
      DELTA®-EQ DRAIN Illustration

    Advantages

    • Optimized economy for vertical applications
      DELTA®-EQ DRAIN offers an optimal knob structure for high water loads and a compressive strength that enables installation depths of up to 7 m. This makes it suitable for the almost all vertical applications.
    • High drainage capacity
      With a drainage capacity of 2.9 l/m.s. DELTA®-EQ DRAIN tops the requirements of the drainage standard DIN 4095 many times (drainage capacity min. 0.3 l/m. s at i=1.0) and thus ensures the safe and rapid drainage of seepage and stratified water. So, DELTA®-EQ DRAIN contributes to the reliable moisture protection of a building.
    • No silting up of the nub structure
      With its special structure and its characteristic opening width of 110 μm, the laminated geotextile is extremely filter-stable and permanently prevents the dimpled sheet from becoming silted up.
    • Even load distribution
      The contact area between DELTA®-EQ DRAIN and the surface is approx. 80%. So, the seal is optimally protected from punctiform loads from the filling material.
    • Smooth overlapping edge
      The one-sided, approx. 10 cm wide, smooth edge, in connection with the just as far protruding filter-stable geotextile, makes it very easy to professionally overlap the drainage membranes.
    • Conformity to standards and guidelines
      DELTA®-EQ DRAIN is certified/CE-marked according to EN 13252 and meets the requirements of DIN 4095 and DIN 18533.

    Application

    DELTA®-EQ DRAIN is used as a vertical surface drainage on pressure-stable surfaces. It can be applied either vertically or horizontally to the top of the ground. The filter-stable geotextile always faces the ground. The membrane track can either be fixed temporary above the surface sealing or in case of perimeter insulation with the DELTA fastening screw.

    Technical data

    Material Dimpled sheet made of high-density polyethylene (PE-HD) with laminated geotextile made of polypropylene dimple height
    Dimple height approx. 9 mm
    Compressive strenght approx. 250 kN/m² (EN ISO 25619-2)
    Air gap approx. 7,9 l/m²
    Servicetemperature range from -30 °C to + 80 °C
    Tensile strength MD 12,6 kN/m, CMD 12,6 kN/m (EN ISO 10319)
    Dynamic perforation resistance 38 mm (EN ISO 13433)
    Characteristic opening size 110 μm (EN ISO 12956)
    Water permeability 0,105 m/s (EN ISO 11058)
    Water drainage capacity 2,9 l/m · s bei 20 kPa (Gradient i = 1,0) (EN ISO 12958)
    Weather resistance To be covered within a term of two weeks from the date of installation (EN 12224)
    Dimensions 12,5 x 1,00 m without smooth edge, 12,5 x 2,00 m, 12,5 x 2,40 m, 12,5 x 2,50 m

    Accessories

    smallRetina 10:09:11 mediumAlias 10:09:11
    DELTA®-TERRAXX PROFIL in der Anwendung

    DELTA®-TERRAXX PROFIL

    Edge trim profile with embossed folds used as a top cover for dimpled sheets and perimeter insulation up to 100 mm.
    smallRetina 10:09:11 mediumAlias 10:09:11
    DELTA®-NOPPENBAHNEN PROFIL

    DELTA®-NOPPENBAHNEN PROFIL (Profile of dimpled sheets)

    Edge trim on the dimpled sheets DELTA®-MS and DELTA®-GEO DRAIN QUATTRO for the coverage of the upper edge of the protection and drainage systems.
    smallRetina 10:09:11 mediumAlias 10:09:11
    DELTA®-MS DÜBEL

    DELTA®-MS DÜBEL (Dowel)

    Plastic hammer-in dowels for the assembly of DELTA® drainage membranes.
    smallRetina 10:09:11 mediumAlias 10:09:11
    DELTA®-TERRAXX SCHRAUBE

    DELTA®-BEFESTIGUNGSSCHRAUBE (Fastening screw)

    Assembly aid for attaching DELTA® protective and drainage membranes such as for example DELTA®-TERRAXX to perimeter insulation panels made of XPS.

    Download

    PDF | 470.1 kB

    Brochure DELTA®-EQ DRAIN

    PDF | 344.1 kB

    Declaration of Performance DELTA®-EQ DRAIN

    Contact

    smallRetina 10:09:11 mediumAlias 10:09:11 large 10:09:11 xlarge 10:09:11

    Would you like information on detailed product properties, use cases or other technical topics?
    Then feel free to contact our application department on +49 2330 63 578 or atabvf@doerken.de.

    Do you have questions about prices, availability or the status of your order?
    Our sales service will help you with these matters on +49 2330 63 636 or membranes@doerken.de.

    Contact form

    You can also use our contact form to send us your request.

    International contact

    Here you will find all the contact details of our international DÖRKEN Membranes subsidiaries and importers.