Search

    Foundation wall protection accessories DELTA®-BEFESTIGUNGSSCHRAUBE (FASTENING SCREW)

    Assembly aid for fastening DELTA® protective and drainage membranes such as DELTA®-TERRAXX on perimeter insulation panels made of XPS from a minimum thickness of 60 mm.

    01 /01
    smallRetina 04:02:02 mediumAlias 04:02:02 large 04:02:02 xlarge 04:02:02
    DELTA®-TERRAXX SCHRAUBE
      smallRetina 04:02:02
      DELTA®-TERRAXX SCHRAUBE

    Advantages

    • Easy and secure fixing
      The fastening of studded and drainage sheets to the perimeter insulation takes place without any perforation of the sealing. This means less material waste, no temporary aid structures required for the temporary fastening of the sheets.

    Application

    Prerequisite: The perimeter insulation panels must be firmly glued to the subsurface and/or the sealing and stand on a stable subsurface at the base.
    The fastening is carried out at the upper edge of the perimeter insulation at a distance of approximately 50 to 70 cm or from top to bottom on the entire insulated area with approximately 1 screw/sqm.
    For this purpose, the DELTA®-BEFESTIGUNGSSCHRAUBE (Fastening screw) is pierced through the drainage membrane and then screwed into the insulation board. At breakthroughs such as for example light shafts, the screws are set as at the edges at a distance of approximately 50 - 70 cm.

    Technical data

    Material Patented plastic screw
    Material requirement approx. 1 pieces/m² and/or approx. 3 pieces/m
    Required tool Screwdriver with bit TORX 40
    Packaging 50 pieces/box

    Contact form

    You can also use our contact form to send us your request.

    International contact

    Here you will find all the contact details of our international DÖRKEN Membranes subsidiaries and importers.